Lenovo L2021 Manuale Utente Scaricare il pdf (Pagina 18)

Chapter 2.

2-9

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.

Do not:

• Apply water or liquid directly to your monitor.

• Use solvents or abrasives.

• Use flammable cleaning materials to clean your monitor or any other electrical

equipment.

• Touch the screen area of your monitor with sharp or abrasive items. This type of

contact may cause permanent damage to your screen.

• Use any cleaner which contains an anti-static solution or similar additives. This

may harm the coating of the screen area.

Do:

• Lightly dampen a soft cloth with water and use this to gently wipe the covers and

the screen.

• Remove grease or finger marks with a damp cloth and a little mild detergent.

)LJXUH

)LJXUH

)LJXUH



Secure the screws

(4 screws)

Wall-mount the

installation plate

)LJXUH

)LJXUH )LJXUH

)LJXUH )LJXUH

)LJXUH



LCD wall-mounting instructions:

1.The gap between the installation holes on the back of the LCD is

75 *75mm.

There should have corresponding position of holes on the wall-mounting plate.

2.The installation holes on the back of the LCD should be of regular M4 thread.

Select the corresponding screws to use.

3.The effective depth of the threaded holes on the back of the LCD is 8 mm,

the length of the thread of the fixing screw is recommended as follows:

L = 8 mm + installation plate thickness - (1~2) mm.

4.Remove the base and the support. See descriptions on the above illustration.

5.Insert the screw for fixing through the round hole on the wall-mounting plate and

screw it onto the installation hole on the back of the LCD and then tighten it.

6.There are four fixing screws.

Cable clip usage instructions:

First take out the cable clip as shown in Figure 1. After connecting the power cord and the signal cable,

put the remaining cable in the back of the support garnish as shown in Figure 2. Use the cable clip to wrap

the remaining cable and position them in the slot of the support garnish as shown in Figure 3.

Preparing the monitor for wall-mounting

Step 1: To detach the base by pressing the button as shown in Figure 1.

Step 2: Press the cable clip upwards and remove it as shown in Figure 2.

Step 3: open the support garnish by pushing it upward as shown in

Figure 3 (after hearing a chirpping sound).

Step 4: Screws connecting the support to the display will be fully exposed.

Remove the screws and then the support can be disassembled

as shown in Figure 4.

Detaching the monitor stand:

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Commenti su questo manuale

Nessun commento

Lenovo L2021 Manuale Utente Pagina 18

Commenti su questo manuale

Prodotti e manuali riguardandi Televisori e monitor Lenovo L2021